The cored electrode or oil-soluble solder is applied on the solder surface. The flux-cored welding or welding part with oil on the surface contains a lot of welding dust in the dust caused by the welding process. The welding dust has high viscosity and will adhere to the surface of the filter core, and it is difficult to remove the ash installation through the filter device. This will speed up the blockage of the filter device components, resulting in a large wind landing, resulting in detailed blockage of the filter device components, and thus the loss of the practical effect of overworry. It is recommended that the processing plant should indicate the dust situation in the production workshop to the manufacturer of environmental protection dust collector equipment at the beginning of the purchase, and select the appropriate filtration material.

Smoke purifier, this definition should be very good to grasp, is the technical professional for the removal of metal material smoke, organic waste gas, solder smoke purifier. It has the key shape of two-arm mobile and arm mobile, and is a mobile, the selection of pedal-type fume purifier, which can be used in some natural environments polluted by organic waste gas environment. Now let's learn a little bit about it. The shell of the smoke purifier mostly uses a metal material structure, and the outside is coated with anti-corrosion electrostatic powder, which is ultimately required to be applied in some industrial production workshops, in order to better achieve certain performance, the main performance is not the same as the excellent peripheral resistance of the work site.

Smoke purifier

Welding dust purification is not good after the equipment can be applied regardless of it, it has a certain operating specifications. First, it is required to control the operating time of the system, under normal circumstances, after eight hours of accumulation work, it is required to turn off the machine and equipment to terminate the ash removal process. Naturally, if the machine equipment weapons are equipped with a single pulse reverse air dust removal equipment, you do not need to interrupt the equipment, just press the gas producer button can start automatic ash removal.

The application of cleaning equipment is to better improve the harsh environment and create an excellent natural environment for consumer theme activities, such as in the factory workshop, because in the production and manufacturing theme activities, some residue is often discharged, and the smoke purifier manufacturer in the processing plant is mostly over concrete, epoxy floor paint or wear-resistant ground. Frequent cleaning can better ensure the application life of the epoxy floor, which requires application to industrial production dust removal equipment.