Smoke purifier and then the disease is difficult to detect. In case of blockage, it should be done as follows:

1, the first requirement is to first see whether there can be items blocked on the side of the vacuum cleaner, because the vacuum cleaner is immediately touched with waste, once there is a blockage, it should be the first time to check this position, to see if there are items blocked, and immediately clean up.

2, if the vacuum cleaner is not working, we should see if the plastic hose of the vacuum cleaner is blocked, you can check the expansion and bending of the vacuum cleaner tube, you can take out the plastic hose of the industrial vacuum cleaner to check, find the blocked objects and clean the poison.

3, shut down to check whether there is too much dust attached to the filter element, the smoke purifier filter element has not been cleared or replaced for a long time will also produce air exchange is not smooth, and blocked, please settle on time or replace the dust separator and filter element to ensure the smooth vacuum cleaner.

4, check the pump pressure switch part, smoke purifier to see whether the pump pressure switch is stuck in the air intake, close the equipment, and settle the dirty things around the pump pressure switch.

5. If it is a dry and wet dual-use industrial vacuum cleaner, please check whether it absorbs moisture without removing the filter element and dust separator. The wet filter element will stick the dust on top, resulting in blockage.

It is not too difficult to find that the consumption of smoke and dust is a very intrusive thing, advocating the application of industrial production dust removal equipment, it is a common cleaning tool, can collect waste, digest and absorb the smoke caused by consumption, smoke purifier manufacturers scrap these, so far purify the office environment and maintain the health of workers. More common areas are textiles and chemical manufacturing.