The solder fume purifier is used to purify the smoke in welding and laser cutting. The whole process of this smoke is likely to be related to high temperature, and under normal conditions, the whole process of the spot will encounter useful fire. If your fume purifier immediately touches the fire, then the smoke purification treatment is likely to destroy some parts of the machine and equipment. In the case of vacuum packaging, it is difficult to avoid the smoke that will cause flames, many solder smoke filter machines and equipment will also be purchased with a fire safety net, this is a new type of nanotechnology flame retardant filter element, fire safety net it has excellent permeability, but also can remove ash, the machine and equipment should not be afraid to light with fire, Not only the service life is longer than the traditional filter material. Workers should be concerned about the orientation of the fire in the whole process of application, and should prevent direct contact with the dust collector equipment as soon as possible, so as to reduce the damage of excess machinery and equipment.

The cored electrode or oil-soluble solder is applied on the solder surface. The flux-cored welding or welding part with oil on the surface contains a lot of welding dust in the dust caused by the welding process. The welding dust has high viscosity and will adhere to the surface of the filter core, and it is difficult to remove the ash installation through the filter device. This will speed up the blockage of the filter device components, resulting in a large wind landing, resulting in detailed blockage of the filter device components, and thus the loss of the practical effect of overworry. It is recommended that the processing plant should indicate the dust situation in the production workshop to the manufacturer of environmental protection dust collector equipment at the beginning of the purchase, and select the appropriate filtration material.

Because there are many industrial production residues caused by the consumption theme activities of the factory workshop every day, including iron pins, smoke and dust, powder equipment flying, producing gas turbidity can not be cleared with unusual methods. Therefore, the factory floor will pursue some reasonable ways to clean up, and industrial production dust removal equipment is one of them.